In this story
Curtains that are too short make ceilings look low. Too narrow and they never close properly. Here's how to get the size right.
Step 1: Measure the width
Measure the rod, not the window. The rod should extend 10–15 cm past the frame on each side so curtains don't block light when open.
Step 2: Decide the fullness
For soft gathers, total curtain width should be 1.5 to 2 times the rod width. For a 4 ft window with a 5 ft rod, plan for 7.5 to 10 ft of fabric, usually two panels.
Step 3: Pick the length
- Window (5 ft): for windows with a sill, ending just below the sill.
- Door (7 ft): standard for most Indian doors and full-length windows.
- Long door (9 ft): for high ceilings or when the rod is mounted near the ceiling.
Measure from the rod to where you want the curtain to end. For a clean look, curtains should just kiss the floor or stop 1 cm above it.
Step 4: Choose the fabric
Handloom cotton filters light softly and breathes in summer. For bedrooms, pick a denser weave or add a lining. See handloom curtains.
Quick tips
- Hang the rod higher than the frame to make the room look taller.
- In humid months, choose cotton over synthetic so curtains don't feel heavy.
- Odd size? We make custom curtains.